CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: ¥| 12¤ë 29 20:36:58 CST 2005 (root@localhost.localdomain) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0 rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) CPU type 0x29006: 264MHz Total memory: 671 Failed.: Timeout occured Reading :: TFTP Server. Failed.: Timeout occured Reading :: TFTP Server. Failed.: Timeout occured Reading :: TFTP Server. TFTP_BLKLEN!! Done. 1773568 bytes read Download of 0x1b1000 bytes completed Write kernel and filesystem binary to FLASH (0xbfc40000) flash device 'flash1.trx' Programming... done. 1773568 bytes written CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: ¥| 12¤ë 29 20:36:58 CST 2005 (root@localhost.localdomain) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0 rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) CPU type 0x29006: 264MHz Total memory: 67108864 KBytes Total memory used by CFE: 0x80800000 - 0x8089BA00 (637440) Initialized Data: 0x80831B70 - 0x80834250 (9952) BSS Area: 0x80834250 - 0x80835A00 (6064) Local Heap: 0x80835A00 - 0x80899A00 (409600) Stack Area: 0x80899A00 - 0x8089BA00 (8192) Text (code) segment: 0x80800000 - 0x80831B70 (203632) Boot area (physical): 0x0089C000 - 0x008DC000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-17-31-A4-22-59, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Null Rescue Flag. Null Restore Flag. set pivot_wait = 0 Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 3760 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029006 Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 16kB, 2-way, linesize 16 bytes. Linux version 2.4.35.4 (chihchun@openwrt) (gcc version 3.4.6 (OpenWrt-2.0)) #10 Mon Jul 21 23:18:51 CST 2008 Setting the PFC to its default value Determined physical RAM map: memory: 04000000 @ 00000000 (usable) On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 CPU: BCM4704 rev 8 at 264 MHz Using 132.000 MHz high precision timer. Calibrating delay loop... 263.78 BogoMIPS Memory: 62824k/65536k available (1482k kernel code, 2712k reserved, 100k data, 88k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Initializing host PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Registering mini_fo version $Id$ devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. squashfs: version 3.0 (2006/03/15) Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 3) is a 16550A b44.c:v0.93 (Mar, 2004) eth0: Broadcom 47xx 10/100BaseT Ethernet 00:17:31:a4:22:59 eth1: Broadcom 47xx 10/100BaseT Ethernet 40:10:18:00:00:2c Amd/Fujitsu Extended Query Table v1.0 at 0x0040 Physically mapped flash: JEDEC Device ID is 0xC4. Assuming broken CFI table. Physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Flash device: 0x200000 at 0x1c000000 bootloader size: 262144 Physically mapped flash: Filesystem type: squashfs, size=0x11403e Updating TRX offsets and length: old trx = [0x0000001c, 0x00000904, 0x0007f800], len=0x001b1000 crc32=0x812a141f new trx = [0x0000001c, 0x00000904, 0x0007f800], len=0x001a0000 crc32=0x19c80c06 Done Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "cfe" 0x00040000-0x001f0000 : "linux" 0x000bf800-0x001e0000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x001f0000-0x00200000 : "nvram" 0x001e0000-0x001f0000 : "rootfs_data" Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 88k freed Algorithmics/MIPS FPU Emulator v1.5 mount: mounting sysfs on /sys failed: No such device mount: mounting devfs on /dev failed: Device or resource busy - preinit - diag: Detected 'ASUS WL-700gE' diag: Spinning up HDD and enabling leds b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. roboswitch: Probing device eth0: found! switch-robo 5084 0 (unused) jffs2 not ready yet; using ramdisk mini_fo: using base directory: / mini_fo: using storage directory: /tmp/root - init - Please press Enter to activate this console. jffs2.bbc: SIZE compression mode activated. b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. eth0.0: Setting MAC address to 00 17 31 a4 22 59. VLAN (eth0.0): Underlying device (eth0) has same MAC, not checking promiscious mode. eth0.1: Setting MAC address to 00 17 31 a4 22 5a. device eth0 entered promiscuous mode VLAN (eth0.1): Setting underlying device (eth0) to promiscious mode. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem driver Revision: 1.00 BFL_ENETADM not set in boardflags. Use force=1 to ignore. usb.c: registered new driver usbdevfs usb.c: registered new driver hub Journalled Block Device driver loaded AEC6X80: IDE controller at PCI slot 01:02.0 PCI: Enabling device 01:02.0 (0000 -> 0003) AEC6X80: chipset revision 16 AEC6X80: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: BM-DMA at 0x0180-0x0187, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x0188-0x018f, BIOS settings: hdc:pio, hdd:pio usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6 usb-ohci.c: usb-00:03.0, PCI device 14e4:4715 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Enabling device 01:03.0 (0000 -> 0001) uhci.c: USB UHCI at I/O 0x200, IRQ 2 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Enabling device 01:03.1 (0000 -> 0001) uhci.c: USB UHCI at I/O 0x220, IRQ 2 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Enabling device 01:03.2 (0000 -> 0002) ehci_hcd 01:03.2: PCI device 1106:3104 ehci_hcd 01:03.2: irq 2, pci mem c015f000 usb.c: new USB bus registered, assigned bus number 4 EHCI: Enabling VIA 6212 workarounds ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 4 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 jffs2_build_filesystem(): unlocking the mtd device... done. jffs2_build_filesystem(): erasing all blocks after the end marker... done. mini_fo: using base directory: / mini_fo: using storage directory: /jffs mini_fo: build_sto_structure: failed to create storage dir [1]. mini_fo: get_neg_sto_dentry: ERROR building sto structure. BusyBox v1.8.2 (2008-07-16 19:13:27 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M KAMIKAZE (bleeding edge, r11847) ------------------- * 10 oz Vodka Shake well with ice and strain * 10 oz Triple sec mixture into 10 shot glasses. * 10 oz lime juice Salute! --------------------------------------------------- root@OpenWrt:/#