<5>Linux version 2.6.20.1-moko8 (oe@buildhost-old.openmoko.org) (gcc version 4.1.1) #1 PREEMPT Fri Mar 2 21:16:25 CET 2007
<4>CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0003177
<4>Machine: GTA01
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7>  DMA zone: 256 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 32512 pages, LIFO batch:7
<7>  Normal zone: 0 pages used for memmap
<4>CPU S3C2410A (id 0x32410002)
<4>S3C2410: core 202.666 MHz, memory 101.333 MHz, peripheral 50.666 MHz
<6>S3C24XX Clocks, (c) 2004 Simtec Electronics
<4>CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
<4>CPU0: D VIVT write-back cache
<4>CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
<4>CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
<4>Built 1 zonelists.  Total pages: 32512
<5>Kernel command line: rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8 mtdparts=neo1973-nand:0x00040000(u-boot),0x00004000(u-boot_env),0x00200000(kernel),0x000a0000(splash),0x03d1c000(rootfs)
<4>irq: clearing pending ext status 00000080
<4>irq: clearing subpending status 00000002
<4>PID hash table entries: 512 (order: 9, 2048 bytes)
<4>timer tcon=00500000, tcnt a4ed, tcfg 00000200,00000000, usec 00001e51
<4>Console: colour dummy device 80x30
<4>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 128MB = 128MB total
<5>Memory: 126720KB available (2800K code, 256K data, 100K init)
<7>Calibrating delay loop... 100.96 BogoMIPS (lpj=252416)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<4>S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<4>Registering sysclass
<4>DMA channel 0 at c8800000, irq 33
<4>DMA channel 1 at c8800040, irq 34
<4>DMA channel 2 at c8800080, irq 35
<4>DMA channel 3 at c88000c0, irq 36
<6>NET: Registered protocol family 16
<4>S3C2410 Power Management, (c) 2004 Simtec Electronics
<4>S3C2410: Initialising architecture
<4> 0:               xdreq0, channels 0---
<4> 1:               xdreq1, channels -1--
<4> 2:                  sdi, channels 0-23
<4> 3:                 spi0, channels -1--
<4> 4:                 spi1, channels ---3
<4> 5:                uart0, channels 0---
<4> 6:                uart1, channels -1--
<4> 7:                uart2, channels ---3
<4> 8:                timer, channels 0-23
<4> 9:              i2s-sdi, channels -12-
<4>10:              i2s-sdo, channels --2-
<4>11:               <NULL>, channels ----
<4>12:               <NULL>, channels ----
<4>13:               <NULL>, channels ----
<4>14:              usb-ep1, channels 0---
<4>15:              usb-ep2, channels -1--
<4>16:              usb-ep3, channels --2-
<4>17:              usb-ep4, channels ---3
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<4>TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP: Hash tables configured (established 4096 bind 2048)
<6>TCP reno registered
<6>JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<4>GTA01 Backlight Driver Initialized.
<4>Console: switching to colour frame buffer device 80x58
<6>fb0: s3c2410fb frame buffer device
<6>s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410
<6>s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<4>S3C24XX NAND Driver, (c) 2004 Simtec Electronics
<6>s3c2410-nand s3c2410-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns
<6>NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
<7>Bad block table found at page 131040, version 0x01
<7>Bad block table found at page 131008, version 0x01
<5>5 cmdlinepart partitions found on MTD device neo1973-nand
<5>Creating 5 MTD partitions on "neo1973-nand":
<5>0x00000000-0x00040000 : "u-boot"
<5>0x00040000-0x00044000 : "u-boot_env"
<5>0x00044000-0x00244000 : "kernel"
<5>0x00244000-0x002e4000 : "splash"
<5>0x002e4000-0x04000000 : "rootfs"
<6>s3c2410-nand s3c2410-nand: clock idle support enabled
<6>s3c24xx-spi-gpio s3c24xx-spi-gpio.1: registering c001f0c4: jbt6k74
<3>jbt_init: entering
<3>jbt_probe: entering
<3>jbt6k74_enter_state: entering(old_state=0, new_state=2)
<3>standby_to_sleep: entering
<3>sleep_to_normal: entering
<3>jbt_init_regs: entering
<3>jbt6k74_display_onoff: entering
<5>usbmon: debugfs is not available
<6>usbcore: registered new interface driver libusual
<7>gta01_udc_command(2)
<4>ether gadget: using random self ethernet address
<4>ether gadget: using random host ethernet address
<6>usb0: Ethernet Gadget, version: May Day 2005
<6>usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk
<6>usb0: MAC f2:81:bb:0a:cd:ce
<6>usb0: HOST MAC be:a3:b1:bd:c2:af
<6>usb0: RNDIS ready
<7>gta01_udc_command(1)
<6>mice: PS/2 mouse device common for all mice
<6>input: GTA01 Buttons as /class/input/input0
<6>wake enabled for irq 50
<6>wake enabled for irq 51
<6>s3c2410 TouchScreen successfully loaded
<6>input: s3c2410 TouchScreen as /class/input/input1
<6>i2c /dev entries driver
<6>s3c2410-i2c s3c2410-i2c: slave address 0x10
<6>s3c2410-i2c s3c2410-i2c: bus frequency set to 98 KHz
<6>s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
<4>pcf50606_init: entering, calling i2c_add_driver
<4>pcf50606_attach_adapter: entering, calling i2c_probe
<4>pcf50606_detect: entering
<4>pcf50606_irq: entering(irq=60, pcf=c0549e00): scheduling work
<3>PCF50606: IRQ 1 cannot be enabled as wake-upsource in this hardware revision!<7>pcf50606 0-0008: rtc intf: sysfs
<7>pcf50606 0-0008: rtc intf: proc
<7>pcf50606 0-0008: rtc intf: dev (254:0)
<6>pcf50606 0-0008: rtc core: registered pcf50606 as rtc0
<6>input: FIC Neo1973 PMU events as /class/input/input2
<4>pcf50606_work: INT1=0x40 INT2=0x0d INT3=0x00:SECOND CHGINS CHGFOK CHGERR
<6>Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
<6>ASoC version 0.13.3
<6>wm8753: WM8753 Audio Codec 0.16
<6>asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
<6>asoc: WM8753 Voice <-> Bluetooth mapping ok
<6>ALSA device list:
<6>  #0: neo1973 (WM8753)
<6>TCP cubic registered
<6>NET: Registered protocol family 1
<6>usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet
<3>ep_disable: ep3-bulk
<7>udc: enabling fast charge
<4>VFS: Mounted root (jffs2 filesystem).
<6>Freeing init memory: 100K
<4>pcf50606_irq: entering(irq=60, pcf=c0549e00): scheduling work
<4>pcf50606_work: INT1=0x40 INT2=0x04 INT3=0x00:SECOND CHGFOK
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<5>JFFS2 notice: (187) check_node_data: wrong data CRC in data node at 0x03c41200: read 0x9344b92c, calculated 0x55928d74.
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<7>PM: Removing info for No Bus:vcs1
<7>PM: Removing info for No Bus:vcsa1
<4>adc_read: entering (pcf=c0549e00, channel=0, data2=00000000)
<4>pcf50606_irq: entering(irq=60, pcf=c0549e00): scheduling work
<4>pcf50606_work: INT1=0x40 INT2=0x00 INT3=0x01:SECOND ADCRDY
<4>adc_read: returnung 639 0
<4>adc_read: entering (pcf=c0549e00, channel=0, data2=00000000)
<4>pcf50606_irq: entering(irq=60, pcf=c0549e00): scheduling work
<4>pcf50606_work: INT1=0x00 INT2=0x00 INT3=0x01:ADCRDY
<4>adc_read: returnung 640 0